Dick Rhodes giving an overview of the TrueTrac System!

A shorter 'highlights reel' professionally voiced over - The first video we ever had made for our track system!

One of the most asked questions is how a track saw differs from a straight edge guide - Here's our take on the answer.

A new addition to the product line, our Dado Jig allows for easy custom sized dado grooves!

Great for added security when working with expensive woods or other materials.

If you're looking for a small-space friendly work bench designed for large sheets of plywood, this is your best friend! Use 1x4 lumber for a sacrificial surface.

Jacob Rhodes showing the steps to mount your saw to the TrueTrac Adapter Plate

Jacob Rhodes walking you through how to properly trim the ZCB and Anti-Chip Strips after mounting your saw.

Video instructions for mounting the Router Adapter Plate to your router! This is for the original Router Plate, not the Dado Jig.

Jacob Rhodes showing the steps to mount your router to the TrueTrac Dado Jig and how the jig functions.

Short video covering some of the frequently asked questions about the anti-chip strips and a few other items.

Jacob Rhodes walks you through what comes with the kit, how to install, and how to use the Simple Square.

Jacob Rhodes showing the Dust Collection Nozzle in action.

Steps to install and trim both the DCN and the Anti-Chip strips on your track.

Jacob Rhodes showing the steps required to modify your existing Saw Adapter Plate for the new Dust Collection Nozzle.

Billy produces some great content on his YouTube Channel"Recycled Creations"and does a pretty wide variety of projects as well!

Billy McCord starts his Trestle Table project, which is a three part series!

Part two of the Trestle Table, showcasing the breadboard ends.

Final part of the Trestle Table series showing the trestle leg construction.

Phil Pinsky creates a Drill Charging Station - An easy way to organize your shop!

Rick LaFaver turns old gymnasium bench seats into a modern dining table!