TrueTrac Dust Collection Nozzle
The DCN may be purchased in two ways:
- Bare Tool: Includes the DCN, 60 Degree Elbow, mounting hardware, installation/saw plate adaption instructions.
- This allows you to adapt an existing Saw Adapter Plate for the DCN with the use of a router table with an indexable fence system.
- DCN w/ Updated Plate: Includes an updated Saw Adapter Plate, new mounting hardware/set-up items, along with the DCN, 60 Degree Elbow, and brass inserts.
- This is a reduced price kit aimed at owners that would like to include dust collection with their system, but may not have access to a router table to easily adapt their existing saw plate.
With the TrueTrac Dust Collection Nozzle you can add dust collection to any circular saw used with the TrueTrac Pro-Series System!
The Dust Collection Nozzle (DCN) is designed to fit under the Universal Saw Adapter Plate for the Pro-Series systems and mounts directly to the Adapter Plate with included brass inserts and pan head bolts.
The DCN and 60 Degree Elbow both accept standard 1.25" OD vacuum hoses.
The Saw Adapter Plate has a locating slot and two holes pre-drilled to locate the DCN and allow the brass inserts to be pressed in. The plates have a slot and pair of holes at each end of the plate to facilitate use with left or right bladed saws.
The blade of your saw will be plunged into the DCN in the same manner as the Zero Clearance Block. This provides both anti-chip on the outside of your saw blade, like the ZCB, and also encapsulates the origin point of the majority of your saw dust allowing for more efficient dust collection.