TrueTrac - The Better Track Saw System

RGS - 48” x 48” Manual Feed Slab Mill

Sale price Price $ 649.99 Regular price $ 649.99 Unit price  per 

Please allow 5-7 business days for shipment (Updated 9/29)

***

Working Area Specification: 48" W x 48" L x 2-1/2" Thick (w/o shimming rails)

Total Travel, Spindle Center Line: 49.5" W, 50" L

Router Not Included

The TrueTrac Router Gantry System (RGS) is an easy and accurate way to simultaneously surface and flatten live edge slabs, epoxy tables or counter tops, bar surfaces, table glue-ups, and much more!

Our 100% custom American-made and purpose designed heavy-duty extrusions are expandable to virtually any width or length desired and will easily support your 2-1/2 to 3-1/2 HP router without bending, bowing, warping, or twisting during normal use.

All sliding components are 100% CNC machined from Acetal Copolymer, also referred to as Delrin, which is an engineered plastic specifically designed for sliding friction applications and holds machining tolerances wonderfully.

Simply stated, our system is professionally designed and purposefully built to give you years of trouble-free use and is fully backed by our lifetime money-back guarantee.

The RGS is available in a variety of lengths and widths to suit your project needs and is always able to be expanded later.

This system is a "Manual Feed" option, where the user directly pushes the router back/forth across and down the length of the slab.

The RGS in general is also available with a "Threaded Cross Feed" that allows the user to pin the RGS sled to a threaded rod and move the router across the width of the system by simply turning a hand-crank wheel.

RGS Adapter Plate comes pre-drilled for a variety of routers. Please see the list in the product photos. Blank plates with a 1/4" diameter hole pre-drilled in the center are available upon request via phone or email.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jon Swearingen
Slab flattening

Very easy to setup and to use. After using my only regret was to not getting the bigger system, will be upgrading

J
John Byrne
WOW! thus far

The abilities of this machine just continue to grow! Thank you for the information on the finer points of the gantry system and tips on where to get the best materials to build my frame. P.S. Sawing more and more outside now, will be buying one of your track saw kits!

★Product Reviews

Our Customers Speak For Us:

207 reviews
92%
(190)
6%
(12)
1%
(2)
1%
(2)
0%
(1)
well built

Works great at refining rough cut lumber into flat and usable boards.

Take caution on setup

The first time I used the true track, it wasn't straight. Seem you need to double check with a long straight edge to make sure the two pieces are straight. Just butting up the joint doesn't guarantee a straight edge cut.

Hi Larry!

It’s exceedingly rare to have any misalignment issues when joining our tracks. Id say less than 1:100 units have an issue and it’s easily solved. Take a trusted 90 degree square and see if the cross cut on the aluminum track itself is off on one of the tracks.

If it’s hard to tell an alternative method to check is to leave a business card gap between the tracks rather than butting them tightly together. If this provides an automatic straight joint with no fiddling, one of the faces is not exactly 90 degrees. If you can pin it down to an extrusion we’ll replace it for free!

If the two faces are pressed tightly together and both are not exactly 90 degrees then they will override the dovetail connectors and misalignment is the result.

Thank you for the honest feedback and I wish you would have reached out as soon as the issue came up so we could resolve it!

Excellent product

Have a lot of slabs to flatten and decided I needed a good way. Did a bunch of research and decided on the Truetrack system. Built the frame and mounted the rails and went to work. I was really surprised at how easy it was with beautiful results.

Fantastic system for transforming your circular saw!

After installing the saw base on my DeWalt circular saw (along with a new blade), I have primarily used my TrueTrac for small projects so far. In fact, it is getting much more use than I expected! The main reason I purchased it was to rip long boards cleanly to build skin on frame canoes. I was hoping it would give better results and be less dangerous than using the table saw. This has exceeded my expectations--each cut is perfect! I purchased the 12ft kit as well as an additional 2ft section of track, and this is now my go to saw when I need precision.

Thank you! Well worth every penny.

Love my TrueTrac!

Nothing to say. Exactly as advertised. Great customer service and follow up.