RGS - 48” x 48” Manual Feed Slab Mill
Unlock the beauty of that perfectly sized coffee table slab, smooth out the variations in your end grain cutting boards, or even leap-frog your way through a bigger project with the TrueTrac 48-inch x 48-inch Router Gantry System.
- Working Area
- Material Width: 48 in.
- Material Length: 48 in.
- Material Thickness: 2-1/4 in.
- Modular in both length and width
- Easily add either 27-1/2 or 55 in. extension kits
Take control of your router with our Gantry System and you can achieve unparalleled precision in your cuts, making even the most challenging projects a breeze. Trust us, working with decent sized slabs, resin pours, or large glue-ups will never be the same.
-
90-Day Money Back Guarantee
-
Lifetime Warranty
-
Unlimited Phone & Email Support
-
Clean, Consistent Cuts Every Time
-
Precision Tools, American Made
This 48-inch by 48-inch capacity kit is categorically the second largest seller for the RGS units, giving you a generous working area to handle virtually any moderately sized project.
Working Area
- Material Width: 48 in.
- Material Length: 48 in.
- Material Thickness: 2-1/4 in.
It's an excellent way to get the project you've got now finished, while leaving the door open for other opportunities later.
Modular in Length and Width
- 27-1/2-inch or 55-inch extension kits readily available
- Kits include rails and dovetail connectors
Worried about a larger project popping up? Designed to be modular from the start, the configurable working areas of the Router Gantry System make tackling everything from charcuterie, cutting, or chess boards up to the largest slab, glue-up, countertop, bar, or epoxy resin project a breeze.
The RGS is easy to expand at any time to a larger (or smaller) working area utilizing either the 27-1/2 or 55-inch length extension kits.
Optional Upgrades
-
Threaded Cross Feed
With the Threaded Cross Feed upgrade you can precisely control the placement of your router across the width of the RGS unit, opening a new realm of projects that are possible.
For planing, consistently step over for your next pass leading to improved surface finishes that require up to 80% less finish sanding.
For everything else, the Threaded option effectively turns the RGS into a router table flipped upside down. Effortlessly cut box border inlay grooves, create equally spaced flutes on beams or mantles, edge joint, or perform shaping operations with confidence.
-
Dust Collection Shroud - (View DCS Here)
This dual-sided shroud collects 90% of the dust and shavings from your RGS unit when paired with a 800-1000 CFM dust extractor utilizing an industry standard 4-inch diameter hose. Kit includes everything from the strip brushes upwards to a 2-1/2 to 4-inch wye fitting.
Lifetime Warranty
With high-precision CNC machined sliding components ensuring a lifetime of smooth-sliding planing capabilities, this system eliminates the guesswork and inconsistencies that can come with a DIY setup.
Additionally, we're always a phone call or email away to help you with any issues that may crop up. We stand behind our products and will do everything we can to make sure our products meet both yours and our expectations for fit and function.
Let's get technical!
- Working Area
- Material Width: 48 in.
- Material Length: 48 in.
- Material Thickness: 2-1/4 in.
- This assumes the bottom long axis rails are on the same planar surface as the material being processed.
- To handle thicker materials, simply shim under the long axis rails and lift the RGS unit relative to the main support surface.
- Outer Physical Dimensions
- Unit Width: 57 in.
- Unit Length: 57 in.
- Total Travel (Spindle Center)
- Width Travel: 49-1/2 in.
- Length Travel: 50 in.
- Unit Weight
- 34 lbs
- Materials Used
- 6063 custom extruded aluminum, satin finish hard anodize finish
- Solid Acetal Resin, CNC machined sliding components and end caps
- 6061-T6 1/4-inch thick aluminum base plate, predrilled for 20 routers
The following items make the 48-inch x 48-inch Manual Feed Slab Mill:
- Four (4) 55 inch length RGS guide rails
- Four (4) 6-inch length self-aligning dovetail connectors, with set screws installed
- Eight (8) Bearing End Caps, installed on rails with 10-24 Type F Machine Screws
- Two (2) Short Linear Slides (Short Runners) with bubble levels installed
- Two (2) Long Linear Slides (Long Runners)
- Two (2) Drop Downs
- One (1) Router Base Plate, pre-drilled for listed routers (see compatibility below)
- Fourteen (14) 10-24 threaded, 1/4 inch diameter, 1/4 inch length Shoulder Bolts
- Six (6) 8-32 x 1/2 L flat head Phillips drive machine screws
- One (1) 1/8 inch L-shaped hex wrench
- Two (2) Hand Grip Knobs
If the Threaded Cross Feed version is chosen, one of the 55-inch extrusions above will have the 55-inch Threaded Rod Kit installed. Additionally, two (2) knurled brass thumb screws will be included with the standard hardware packet as well as one (1) hand crank to attach to the threaded rod.
The Threaded Cross Feed units can be moved manually without the rod or hand crank by simply removing the two thumb screws and moving the Router Base Assembly by hand.
Customer Reviews
You guys did a great job getting the sled to me but I have not had a chance to put it together . Will get into it this winter. Thank you ever so much. Bill
Customer service has been very good on providing instructions.
Great product! Easy to setup and get started! My first project was a live edge wild cherry entryway table. 18x36
Just started using it, but so far it works great. It is producing perfectly flat work and glides smooth.
Using this table has been amazingly easy. Instructions provided are clear and unambiguous, and the individual parts fit very well together. Prompt delivery is a bonus.
Mounting Hole Patterns Pre-Drilled For The Following Routers:
- Bosch 1617, 1618, 1619, 1619-EVS (fixed base only)
- DeWalt 616, 618, 625
- Festool OF1400, OF2200
- Hitachi M12VC
- Makita 1100 (Makita RP1800 & RP2301 require blank base plate)
- Milwaukee 5616, 5624, 5625-20
- Bora PM-6250 Fixed Base
- Porter Cable 690, 890, 7529, 97529, 8529
- Porter Cable 7518, 7519, 7538, 7539
- Ridgid 2930
- Triton TRA001, MOF001, TFBR001
Blank plate with one 1/4-inch hole drilled on center available upon request. Router plates are fully CNC machined 1/4-inch thick 6061 aluminum.
