RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill

RGS - 48” x 48” Slab Mill

Unlock the beauty of that perfectly sized coffee table slab, smooth out the variations in your end grain cutting boards, or even leap-frog your way through a bigger project with the TrueTrac 48-inch x 48-inch Router Gantry System.

  • Working Area
    • Material Width: 48 in.
    • Material Length: 48 in.
    • Material Thickness: 2-1/4 in.
  • Modular in both length and width
    • Easily add either 27-1/2 or 55 in. extension kits

With the optional Threaded Cross Feed already installed in this unit, working with decent sized slabs, resin pours, or large glue-ups will never be the same.

Sale price$1,168.00 CAD
/
Style
  • 90-Day Money Back Guarantee 90-Day Money Back Guarantee
  • Lifetime Warranty Lifetime Warranty
  • Unlimited Phone & Email Support Unlimited Phone & Email Support
  • Clean, Consistent Cuts Every Time Clean, Consistent Cuts Every Time
  • Precision Tools, American Made Precision Tools, American Made

Let's get technical!

  • Working Area
    • Material Width: 48 in.
    • Material Length: 48 in.
    • Material Thickness: 2-1/4 in.
      • This assumes the bottom long axis rails are on the same planar surface as the material being processed.
      • To handle thicker materials, simply shim under the long axis rails and lift the RGS unit relative to the main support surface.
  • Outer Physical Dimensions
    • Unit Width: 57 in.
    • Unit Length: 57 in.
  • Total Travel (Spindle Center)
    • Width Travel: 49-1/2 in.
    • Length Travel: 50 in.
  • Unit Weight
    • 34 lbs
  • Materials Used
    • 6063 custom extruded aluminum, satin finish hard anodize finish
    • Solid Acetal Resin, CNC machined sliding components and end caps
    • 6061-T6 1/4-inch thick aluminum base plate, predrilled for 20 routers

The following items make the 48-inch x 48-inch Threaded Cross Feed Slab Mill:

  • Three (3) 55 inch length RGS guide rails
  • One (1) 55 inch length RGS Guide rail, with the threaded rod kit installed
  • Four (4) 6-inch length self-aligning dovetail connectors, with set screws installed
  • Eight (8) Bearing End Caps, installed on rails with 10-24 Type F Machine Screws
  • Two (2) Short Linear Slides (Short Runners) with bubble levels installed
  • Two (2) Long Linear Slides (Long Runners)
  • Two (2) Drop Downs
  • One (1) Router Base Plate, pre-drilled for listed routers (see compatibility below)
  • Fourteen (14) 10-24 threaded, 1/4 inch diameter, 1/4 inch length Shoulder Bolts
  • Six (6) 8-32 x 1/2 L flat head Phillips drive machine screws
  • One (1) 1/8 inch L-shaped hex wrench
  • Two (2) Hand Grip Knobs

If the Threaded Cross Feed version is chosen, one of the 55-inch extrusions above will have the 55-inch Threaded Rod Kit installed. Additionally, two (2) knurled brass thumb screws will be included with the standard hardware packet as well as one (1) hand crank to attach to the threaded rod.

The Threaded Cross Feed units can be moved manually without the rod or hand crank by simply removing the two thumb screws and moving the Router Base Assembly by hand.

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Dean Mahaffey
Great equipment and value.

The True Trac products are top notch. We received ours within the timeframe relayed. It was complete and the quality of the product was apparent right away. Sturdy, well built and easy to set up. The ability to index the router on the slab enhances the final product.
Add to that the great customer service and advice from the folks at True Trac and it becomes an easy decision... Recommend Highly

S
Steve Losgar

I have used the flattening gantry to flatten two table tops so far and am happy with the results. It’s easy to set up and I would recommend the tooling

D
Daniel K
well built

Works great at refining rough cut lumber into flat and usable boards.

This product ships via UPS and is not deliverable to a PO Box due to size and weight.

Currently we are shipping within 2-3 business days or faster for all RGS units.

We are located in Ohio. Anything East of the Rocky Mountains is generally 3 days or less transit time, with the upper New England area and the west coast averaging 4-5 days.

We can ship internationally via UPS or DHL and frequently ship to Canada.

Mounting Hole Patterns Pre-Drilled For The Following Routers:

  • Bosch 1617, 1618, 1619, 1619-EVS (fixed base only)
  • DeWalt 616, 618, 625
  • Festool OF1400, OF2200
  • Hitachi M12VC
  • Makita 1100 (Makita RP1800 & RP2301 require blank base plate)
  • Milwaukee 5616, 5624, 5625-20
  • Bora PM-6250 Fixed Base
  • Porter Cable 690, 890, 7529, 97529, 8529
  • Porter Cable 7518, 7519, 7538, 7539
  • Ridgid 2930
  • Triton TRA001, MOF001, TFBR001

Blank plate with one 1/4-inch hole drilled on center available upon request. Router plates are fully CNC machined 1/4-inch thick 6061 aluminum.

RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill
RGS - 48” x 48” Slab Mill

RGS - 48” x 48” Slab Mill

Sale price$1,168.00
/
Sale price$1,168.00 CAD
/

Product Reviews

What our customers say

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Dean Mahaffey
Great equipment and value.

The True Trac products are top notch. We received ours within the timeframe relayed. It was complete and the quality of the product was apparent right away. Sturdy, well built and easy to set up. The ability to index the router on the slab enhances the final product.
Add to that the great customer service and advice from the folks at True Trac and it becomes an easy decision... Recommend Highly

S
Steve Losgar

I have used the flattening gantry to flatten two table tops so far and am happy with the results. It’s easy to set up and I would recommend the tooling

D
Daniel K
well built

Works great at refining rough cut lumber into flat and usable boards.

90 Day Returns

If you don't love your TrueTrac product or you've ordered the wrong thing, simply let us know, send it back within 90-days and we'll give you a replacement or prompt refund. No questions asked.

TRUETRAC TRIPLE ‘C’ GUARANTEE

Our precision made tools, kits and systems are designed to give you Clean Consistent Cuts every time whether you're ripping plywood sheets or flattening rough cut lumber slabs. If they ever let you down because of an equipment failure on our part, just let us know and we'll bend over backwards to make things right.

LIFETIME GUARANTEE

We stand behind our products and want you to use them to make beautiful, heirloom pieces for years to come. If something breaks, we'll send a replacement straight away.

TELEPHONE SUPPORT

Got a question? Speak to one of our woodworking experts anytime between 9-6 Eastern and ask us anything about our products, how to set them up or how to get the best out of them.

Precision Made in Ohio, USA

We're proud to be American. Our family-owned production facility is located in Southern Ohio. We source nearly all our materials and components from Ohio too.