This bundle has traditionally been our entry level offering for trade shows around the country.

With the 57 inch track included in the 4ft Starter Kit portion of the bundle, easily cross-cut and handle most smaller plywood projects.

If you're using half sheets of cabinet grade veneered plywood, those half sheets usually measure 5ft x 5ft, so the addition of the 2ft track extension gives you the ability to handle those sheets with ease.

You can also use the shorter track by itself to cross-cut smaller projects without having to balance the longer 57 inch track section.

Cutting Capacities:

Length = 72 inches total, with 9 inches of overhang.

Depth depends on the blade diameter in use.

The adapter plate and track will remove 3/4 of an inch from your overall depth of cut (DOC).

With an average 6-1/2 inch bladed saw your DOC is 1-1/8 inches

7-1/4 blade = 1-1/2 inch material 8-1/4 blade = 2 inch material 10-1/4 blade = 3 inch material

The Universal Saw Adapter Plate comes in two sizes. The standard size is appropriate for any circular saw with a 6-1/2 inch to an 8-1/4 inch diameter blade. The larger saw adapter plate is designed for the 10-1/4 inch diameter saws. Email or call if large plate is required in this holiday bundle.

Bundle Includes:

• One (1) 57 inch track
• One (1) 24 inch track
• Four (4) Appropriate Length Anti-chip Strips, installed on tracks
• One (1) Universal Saw Adapter Plate
• Two (2) Self-aligning Dovetail Connectors (set screws installed)
• One (1) Set-up Block
• One (1) Hardware Packet (6 bolts, 6 nuts, 1 L-shaped hex wrench)
• One (1) Zero Clearance Block (with mounting brass inserts & bolts)
• Full color hard copy of installation instructions.

This system is compatible with virtually any style of circular saw.

The top surface of the Universal Saw Adapter Plate (SAP) is flat and you will be required to custom drill mounting hole locations in both the SAP and the OEM metal base plate of your circular saw. There are no saws manufactured that include predrilled holes that are useful in this scenario.

We provide a machined Set Up Block (SUB) which is used to gauge the distance from the outside edge of the SAP to the body of your saw blade. This ensures paralleism between your saw blade and arbor and the machined grooves on the underside of the SAP, as well as setting the proper spacing so that the blade trims the white Anti-Chip Strips along the edge of the track.

View the entire process by visiting the Videos section of our website, in particular the Set Up & How-To category.