4ft Holiday Bundle #3
The ultimate small-project bundle!
- Easily break down full size 4x8 sheets for smaller projects with 6ft of cutting capacity
- Support your work with our Expandable Track Table Kit
- Effortlessly control your router with our Standard Router Adapter Plate
- Securely fasten the track to your work with our Cantilever Style Clamps
- Keep the fine dust under control with our Dust Collection Nozzle
This saw guide kit was put together specifically or a garage or basement shop on limited space, but with a wide range of project capability.
-
90-Day Money Back Guarantee
-
Lifetime Warranty
-
Unlimited Phone & Email Support
-
Clean, Consistent Cuts Every Time
-
Precision Tools, American Made
Cutting Capacities:
Length = 72 inches total, with 9 inches of overhang.
Depth depends on the blade diameter in use.
The adapter plate and track will remove 3/4 of an inch from your overall depth of cut (DOC).
With an average 6-1/2 inch bladed saw your DOC is 1-1/8 inches
7-1/4 blade = 1-1/2 inch material 8-1/4 blade = 2 inch material 10-1/4 blade = 3 inch material
The Universal Saw Adapter Plate comes in two sizes. The standard size is appropriate for any circular saw with a 6-1/2 inch to an 8-1/4 inch diameter blade. The larger saw adapter plate is designed for the 10-1/4 inch diameter saws. Email or call if large plate is required in this holiday bundle.
Complete Saw Guide Kit Includes:
- One (1) 57 inch track
- One (1) 24 inch track
- Four (4) Appropriate Length Anti-chip Strips, installed on tracks
- One (1) Universal Saw Adapter Plate
- One (1) Standard Router Adapter Plate
- Two (2) Self-aligning Dovetail Connectors (set screws installed)
- One (1) Set-up Block
- One (1) Hardware Packet (6 bolts, 6 nuts, 1 L-shaped hex wrench)
- One (1) Zero Clearance Block (with mounting brass inserts & bolts)
- One (1) Expandable Track Table Kit (extrusions, mounting hardware, instructions)
- One (1) Dust Collection Nozzle (w/ hardware & 60 degree elbow)
- Two (2) Pro-Series Adapted Cantilever Style Clamps
- Full color hard copy of installation instructions.
This system is compatible with virtually any style of circular saw.
The Router Adapter Plate can be bolted to the bottom of virtually any router. Either use the predrilled holes or transfer over your own hole pattern for mounting.
The top surface of the Universal Saw Adapter Plate (SAP) is flat and you will be required to custom drill mounting hole locations in both the SAP and the OEM metal base plate of your circular saw. There are no saws manufactured that include predrilled holes that are useful in this scenario.
We provide a machined Set Up Block (SUB) which is used to gauge the distance from the outside edge of the SAP to the body of your saw blade. This ensures paralleism between your saw blade and arbor and the machined grooves on the underside of the SAP, as well as setting the proper spacing so that the blade trims the white Anti-Chip Strips along the edge of the track.
View the entire process by visiting the Videos section of our website, in particular the Set Up & How-To category.
