8ft Holiday Bundle #3
Building off of the 8ft Holiday Bundle #2, this track saw guide kit adds in our Standard Router Adapter Plate, one pair of our Pro-Series Adapted Cantilever Clamps, and our unique under-the-plate Dust Collection Nozzle!
DCN is sized for 1.25" OD shop-vac style hoses.
-
90-Day Money Back Guarantee
-
Lifetime Warranty
-
Unlimited Phone & Email Support
-
Clean, Consistent Cuts Every Time
-
Precision Tools, American Made
Handle both your straight line cutting and routing projects with ease on materials up to 10ft in length!
Cutting Capacities:
- Length = 120 inches total, with 9 inches of overhang (129 inches of track total)
Depth depends on the blade diameter in use.
The adapter plate and track will remove 3/4 of an inch from your overall depth of cut (DOC).
With an average 6-1/2 inch bladed saw your DOC is 1-1/8 inches
- 7-1/4 blade = 1-1/2 inch material
- 8-1/4 blade = 2 inch material
- 10-1/4 blade = 3 inch material
The Universal Saw Adapter Plate comes in two sizes. The standard size is appropriate for any circular saw with a 6-1/2 inch to an 8-1/4 inch diameter blade. The larger saw adapter plate is designed for the 10-1/4 inch diameter saws.
Bundle Includes:
- One (1) 57 inch track
- One (1) 48 inch track
- One (1) 24 inch track
- Six (6) Appropriate Length Anti-chip Strips, installed on tracks
- One (1) Universal Saw Adapter Plate
- One (1) Standard Router Adapter Plate
- Four (4) Self-aligning Dovetail Connectors (set screws installed)
- One (1) Set-up Block
- One (1) Hardware Packet (6 bolts, 6 nuts, 1 L-shaped hex wrench)
- One (1) Zero Clearance Block (with mounting brass inserts & bolts)
- One (1) Expandable Track Table Kit (extrusions, mounting hardware, instructions)
- One (1) Dust Collection Nozzle (w/ hardware & 60 degree elbow)
- One (1) Pair Pro-Series Adapted Cantilever Clamps
- Full color hard copy of installation instructions.
This system is compatible with virtually any style of circular saw.
The top surface of the Universal Saw Adapter Plate (SAP) is flat and you will be required to custom drill mounting hole locations in both the SAP and the OEM metal base plate of your circular saw. There are no saws manufactured that include predrilled holes that are useful in this scenario.
We provide a machined Set Up Block (SUB) which is used to gauge the distance from the outside edge of the SAP to the body of your saw blade. This ensures paralleism between your saw blade and arbor and the machined grooves on the underside of the SAP, as well as setting the proper spacing so that the blade trims the white Anti-Chip Strips along the edge of the track.
View the entire process by visiting the Videos section of our website, in particular the Set Up & How-To category.
