
Dado Pro Pkg w/ 57 Inch Track
Handle any Dado with ease! Easily cut custom sized dadoes and rabbits in material up to 48 inches long.
We also sell an individual dado/router jig which can be found here:
-
90-Day Money Back Guarantee
-
Lifetime Warranty
-
Unlimited Phone & Email Support
-
Clean, Consistent Cuts Every Time
-
Precision Tools, American Made
This accessory utilizes the exact same track as all of our other products and features a spreading mechanism to remove any play perpendicular to the track itself.
This router jig allows you to measure the wood that you wish to make a dado for, accounting for any and all thickness variations due to unique planing or variations found in all plywood lumber thicknesses. Use either a 1/4 inch or 3/8 inch diameter straight or spiral bit with this system.
The small plates with 1/4 and 3/8 engraved on them correspond to the bit diameter in use. Currently, only 1/4 and 3/8 are available. These small plates are what limit the swing of the pivoting plate after measuring your workpiece and accurately control the width of the dado.
Your router mounts to the plate via a 1 inch Porter-Cable style guide bushing, included with the kit. Your router base plate needs to have the recess available for attaching the guide bushing. Optionally, you may also mount your router directly to the pivot plate in lieu of the base plate already on your router.
A clamping mechanism of some sort is required to hold the track in place while using the dado/router jig, either our Toggle Clamps, Cantilever Style Clamps, or a standard bar clamp will work well.
Additional track saw dado/router jig instructions and info:
- Accepts any 6 to 6-1/2 inch diameter router that can accept industry standard guide bushings
- Dado Width Capacity: 1/4 inch wide to 1 inch wide
- Dado Length Capacity: 48 inches
- Bushing provided with kit
- For use with 1/4-inch and 3/8-inch diameter router bits (up- or down-spiral by preference)
- CNC milled from Starboard HDPE
- Replacement pivoting top plates available by request for $17.99 + shipping.
This kit includes the following:
- One (1) - TrueTrac Dado Jig
- One (1) - 1/4-inch Measurement Gauge Block (for 1/4-inch bits)
- One (1) - 3/8-inch Measurement Gauge Block (for 3/8-inch bits)
- One (1) - Porter Cable / Industry Standard Guide Bushing For Alignment
- Two (2) - TrueTrac Toggle Clamps (fully assembled)
- One (1) - TrueTrac Pro-Series 57-inch Individual Guide Rail
I received my track order quickly only to find a small gauged area to the surface of the track, I emailed Jacob with the complaint.
The next day Jacob had a new one in the mail to me! Had everything mounted and when it arrived mated it up with the track adjusted per the instructions and cut all dados for 4 bookcases with 5 shelves all at the same time, fast efficient and perfectly done! I have Makita, Festool, Dewalt, and other clamp-on straight edges but this setup is the winner. Wish I had found it sooner would have saved a lot of time and MONEY! Thanks, Jacob for the great customer service. PS. Get these TrueTrac Toggle Clamps
they are worth it.
For use with TrueTrac Pro-Series Track Saw Guide Rails.
Units available for purchase from Woodline USA for competitor systems (Festool, Makita, etc)