TrueTrac - The Better Track Saw System

TrueTrac Simple Square

Sale price Price $123.00 Regular price $150.00 Unit price  per 

Please use the drop down menu above to select the "Right-Blade" or "Left-Blade" variant - Looking from the rear of the track saw, right-bladed saws have the blade to the right, and left-bladed saws have the blade to the left.

This square is not designed to work with competitive systems - Festool, Makita, DeWalt, Wen, Kreg, etc, as all of those tracks lack the dovetail connector grooves used for alignment.

A simple bolt-on rail attachment for the TrueTrac Saw guide rail system, utilize this 16 inch length Simple Square for quick and efficient 90 degree crosscuts on plywood or dimensional lumber!

The Simple Square attaches to the track via two 12 inch length self-aligning connectors. The longer connectors average out any variations in the track for consistent performance and the body of the square attaches to the connectors with four shoulder bolts via tight tolerance reamed holes.

For the first installation, follow the set up instructions to reference the square to the track of your choice. After the first reference you will be able to remove the square from the track and reinstall without needing to remove the shoulder bolts from the square.

Please expect approximately 1/32 - 3/64 inch variation at the end of a 4ft cut. Shorter cuts will experience less drift.

TrueTrac Simple Square Instruction PDF

Customer Reviews

Based on 13 reviews
85%
(11)
8%
(1)
0%
(0)
0%
(0)
8%
(1)
S
Stephen Horan
Simple Square can save setup time

I recently purchased the simple square with a 2' length of track. Setup was pretty simple, squaring the base with the track and tightening the 4 bolts. Of course the beauty of the TrueTrac system is that you can line up the white strip with your mark and cut without any further measuring or offset blocks. The square just adds one more dimension to the system. Saves time and improves accuracy, what more could you ask for.

N
Nathaniel Bacon
True Trac Simple Square

Allows for positive control.

m
michael cockerham
True Trac Simple Square

Product works as advertised but could be improved. Tool is rough around the edges and would be more user friendly if you didn't have to screw it on the track every time you want to use it. I would recommend rounding the edges and maybe anodizing the tool to make it not only look better but feel better while using.

D
Dan Rude
A great Square for the system

I purchase this squaring device last year. It was extremely easy to set up and can be quickly used. I use it on a longer track now instead of the shorter one that came with it. It stays true once it is set up due to the dovetail connectors. A excellent product for my setup. I use both a M18 Fuel 6.5" saw and a corded PORTER-CABLE 423MAG 15 Amp 7-1/4-Inch Circular Saw, LEFT HANDED with dust collection for my system.

W
William
BUYER BEWARE!!!

True Trac fails to mention that this "simple square" is proprietary. It will only work with their track. It will not work with tracks made by Makita, Festool, Dewalt, Wen, etc. That vital piece of information is not readily available and therefore, after finally receiving it, I realize that it will not work with my track saw track. Perhaps if they would sell smaller connectors, we could actually use this with an actual track saw. In actuality, "TrueTrac" is not a plunge-cut type of track saw system. By design, they want you to buy a bunch of only their stuff just so you can use your circular saw as a track saw. This was my first and most likely my last dealing with this company. Their website sucks - no search bar at the top and not all of their products are readily seen. This particular piece is difficult to locate on the website I thought. Why was it not listed under "all products". Finally, hidden down at the bottom there is a search button, but again, it seems hidden. That aside, this company should clearly state that this "simple square" will only work with their track. I feel that they intentionally leave that information out. It's just shoddy all around. At least make some adapter connector piece so we can use our existing tracks.

Hi William,

Your response seems hostile and highly frustrated - For that I do apologize, as most of us use woodworking as a point of interest and retreat from the world.

We have an extremely open and generous 100% money back guarantee for situations like this, or honestly anything that comes up that can’t be resolved, so effectively you’ll be out zero dollars. A prepaid return label is always available for any order regardless of timeframe - It isn’t limited by 30, 60, or 90 day return windows.

If I or anyone here had been made aware, with either an email inquiry or phone call, it would have been a discussion of a few moments or lines to have answered directly if our square, clamps, or saw adapter work with competitive systems.

I will publish your review, along with my written response here, so we continue being transparent.

Please keep an eye out for the return label and once we receive the items back I’ll issue the refund for the full product value.

Thank you,
Jacob

★Product Reviews

Our Customers Speak For Us:

333 reviews
93%
(309)
5%
(16)
1%
(4)
1%
(3)
0%
(1)
Track saw setup

Well made products that I anticipate using more. Excellent supporting information and videos as well prompt response to questions and concerns. I got call back around 8PM to a submitted question by a helpful engineer.

So much better than a chalk line

Cutting usable lumber from western red cedar slabs. Trac is true and smooth. Will order another saw adapter plate for a larger saw.

Great system and amazing service.

We love our router gantry system. It arrived well packaged and was easy to set up. We had some questions in the beginning and received a response to our email quickly .

M
TrueTrac Toggle Clamps
Michael Ramadei
Toggle Clamps

I have used these clamps with the True Trac track on a variety of projects. Very secure hold and ease of use. Also have used it on different thickness pieces - easy to adjust. High quality design

Impressive

Fantastic quality! Easy to assemble and I was very impressed with the quality of the machining on the parts. Supper snugg fit with no slop. Some of the bolts were pretty tight going in but I'm also not worried about them working their way out.