TrueTrac Pro-Series 4' Starter Kit
- Adapts any standard circular saw into a truly track guided cutting tool
- Produces chip and splinter free cuts on both sides of your blade
- Provides an exact line-of-cut reference for effortless layout and cut setup
- Offers full control during normal 90 degree cuts as well as 45 degree bevel cutting
- Full color Owner's Manual and video references available for set-up, as well as email or phone support
- 90-day Money-Back Guarantee, Lifetime Warranty on materials and workmanship
- Includes a total of 57 inches of track allowing overhang for starting and finishing a 48 inch or 4ft long cut
-
90-Day Money Back Guarantee
-
Lifetime Warranty
-
Unlimited Phone & Email Support
-
Clean, Consistent Cuts Every Time
-
Precision Tools, American Made
The perfect introductory guide rail kit for the homeowner or weekend DIY'er that allows you to crosscut 4x8 sheet goods, single or multiple boards at once, cut beveled edges, or trim narrow boards for face frames or filler strips.
- Featuring 57 inches of the TrueTrac guide rail system with a 48 inch cutting capacity to easily break down 4' x 8' sheet goods or perform straight line ripping or tapers on dimensional lumber up to 4ft long.
- Allows either standard 90 degree cuts with the blade on the wide side of the track or 45 degree bevel cuts with the blade on the narrow side of the track.
- Easily cross-cut 4ft sheets of plywood or other material with the included 57 inch track.
- Modular design allows for later expansion easily!
- Produce chip and splinter free cuts on both sides of your blade with the included Anti-Chip Strips along the edge of the track as well as the Zero Clearance Block that attaches to the Universal Saw Adapter Plate.
- Add the optional Dust Collection Nozzle to reduce fine airbourne dust by up to 80%
Cutting Capacities:
- Length = 48 inches total, with 9 inches of overhang
Depth depends on the blade diameter in use.
The adapter plate and track will remove 3/4 of an inch from your overall depth of cut (DOC).
With an average 6-1/2 inch bladed saw your DOC is 1-1/8 inches
- 7-1/4 blade = 1-1/2 inch material
- 8-1/4 blade = 2 inch material
- 10-1/4 blade = 3 inch material
The Universal Saw Adapter Plate comes in two sizes. The standard size is appropriate for any circular saw with a 6-1/2 inch to an 8-1/4 inch diameter blade. The larger saw adapter plate is designed for the 10-1/4 inch diameter saws.
The TrueTrac 8ft Combo Kit Includes the following:
- One (1) 57 inch track
- Two (2) 57 inch length anti-chip strips, installed on track
- One (1) Universal Saw Adapter Plate
- One (1) Hardware packet (6 bolts, 6 nuts, L-shaped hex wrench)
- One (1) Setup Jig
- One (1) Zero Clearance Block
- Hard copy of installation instructions
Customer Reviews
Have been really enjoying the ease of breaking down sheet goods.
Would it be possible to design a base that would fit a Ryobi skil saw. They have a very small base plate.
Other than that i love it.
Thanks Jacob.
First let me start by saying overall I love this tool. One thing that I would suggest to anyone looking at buying, get the clamps!! I have read and they say the clamps are not needed. However, the first thing I cut with it was an expensive butcher block counter top. I just about ruined it because it slid on me. Thankfully I bought the clamps. I readjusted, clamped and made the cut. From now on I always clamp the workpiece. It’s not worth risking an expense sheet of birch plywood, etc. Very simple to put together and use. I have two other friends in construction and they are ordering one as well. It is a very good alternative to the expensive track saw. Here is a picture of some closet built in I just finished. All cuts were with the TruTrac.
I finished a 16 step stairway in my home with 1" oak treads and 3/4" oak risers using the TrueTrac 4' Starter Kit and the 24" Pro-Series Guide Rail and everything worked great!
This was my first time using a track system and there was no way I could have been as accurate using my old standby table saw and sliding miter saw. Plus I was able to use my own 7-1/4" Circular saw with the universal track and mounting plate. I highly recommend the TrueTrac Universal system guys, it takes a little time to mount to the plate - but once mounted it turns your old circular saw into a precision portable table saw! Way to go TrueTrac.
Ryan
TrueTrac Pro-Series 4' Starter Kit
Purchased track system as I did not want to buy another power tool (trac saw). Quality of product is very good. Assembly was easy to adapt to my saw and it produces easy straight cuts. Inserts do tend to slide out of track a little easier than I would like but it is just part of the learning process. I used the trac primarily reworking my deck and cutting boards in place. No the that this will change your depth of cut for the saw. Still able to cut 1.5”. Good straight lines, Excellent instructions, easy ordering and Jacob is quick to answer any questions. Thank you.
This system is compatible with virtually any style of circular saw.
The top surface of the Universal Saw Adapter Plate (SAP) is flat and you will be required to custom drill mounting hole locations in both the SAP and the OEM metal base plate of your circular saw. There are no saws manufactured that include predrilled holes that are useful in this scenario.
We provide a machined Set Up Block (SUB) which is used to gauge the distance from the outside edge of the SAP to the body of your saw blade. This ensures paralleism between your saw blade and arbor and the machined grooves on the underside of the SAP, as well as setting the proper spacing so that the blade trims the white Anti-Chip Strips along the edge of the track.
View the entire process by visiting the Videos section of our website, in particular the Set Up & How-To category.
