TrueTrac

TrueTrac Pro-Series 12ft Kit

Sale price Price $532.00 Regular price $600.00 Unit price  per 

***
In Stock And Ready To Ship!
***
Need to easily handle longer straight line rips? This skill saw guide rail system includes everything you need to convert your circular saw into a track saw and rip 12ft lengths!
Features 153 inches of TrueTrac guide rail with a full 144 inch cutting capacity to easily break down over-sized sheet goods or preform straight line ripping or tapers on dimensional lumber, including rough sawn or reclaimed boards, up to 12' long.
12' Track Saw Kit Includes:
  • One (1) 57 inch track
  • Two (2) 48 inch tracks
  • Two (2) 57 inch length anti-chip strips, installed on track
  • Four (4) 48 inch length anti-chip strips, installed on track
  • One (1) Universal Saw Adapter Plate
  • One (1) Hardware packet (6 bolts, 6 nuts, L-shaped hex wrench)
  • One (1) Setup Jig
  • Four (4) dovetail connectors, with setscrews installed
  • One (1) Zero Clearance Block
  • Hard copy of installation instructions

A larger adapter plate is available for saw blades 10+ inches in diameter upon request for an additional $20.00 - Give TrueTrac Saw a call at (937)544-6855 and we'll take care of it!

Customer Reviews

Based on 30 reviews
93%
(28)
3%
(1)
3%
(1)
0%
(0)
0%
(0)
T
Thomas Backes
So much better than a chalk line

Cutting usable lumber from western red cedar slabs. Trac is true and smooth. Will order another saw adapter plate for a larger saw.

J
Jerry Trotter

TrueTrac Pro-Series 12ft Kit

R
Rodney Smith
Good product

Really worked well. Nice to be able to get a true edge on a long board.

K
K.W.
Excellent Product for an 11foot cut

I am making an 11foot dining room table with the top divided into two 5 1/2 foot sections. This 12 track system was ideal to be able to rip the sides of the table so that they perfectly align. The set up was very accurate causing me to use it of both sides of the table in order to ensure they are perfectly straight. My Makita circular saw with a Freud 40 tooth "finish" blade tracked through a 1 1/4 inch solid Maple top like a knife through butter. While I did not get a picture of the 12 foot set up these are photos of me using the TrueTrac system (including vacuum attachment) to rip the edge of a table section before glue up and one showing the length of the table. I had used both a jointer and table saw to prepare the table section but still found it out a bit. The TrueTrac system solved that. Excellent results. Since the 12 foot system is modular I was able to use the shorter track to crosscut the ends of the table. Completely satisfied with this track system which allowed me to avoid a far more expensive purchase of a track saw and extended track system.

D
Dean Pavey

TrueTrac Pro-Series 12ft Kit

★Product Reviews

Our Customers Speak For Us:

333 reviews
93%
(309)
5%
(16)
1%
(4)
1%
(3)
0%
(1)
Track saw setup

Well made products that I anticipate using more. Excellent supporting information and videos as well prompt response to questions and concerns. I got call back around 8PM to a submitted question by a helpful engineer.

So much better than a chalk line

Cutting usable lumber from western red cedar slabs. Trac is true and smooth. Will order another saw adapter plate for a larger saw.

Great system and amazing service.

We love our router gantry system. It arrived well packaged and was easy to set up. We had some questions in the beginning and received a response to our email quickly .

M
TrueTrac Toggle Clamps
Michael Ramadei
Toggle Clamps

I have used these clamps with the True Trac track on a variety of projects. Very secure hold and ease of use. Also have used it on different thickness pieces - easy to adjust. High quality design

Impressive

Fantastic quality! Easy to assemble and I was very impressed with the quality of the machining on the parts. Supper snugg fit with no slop. Some of the bolts were pretty tight going in but I'm also not worried about them working their way out.