12ft Holiday Bundle #2
Easily straight line rip your 12ft boards and have the 90 degree Simple Square hooked up on the 2ft track section for handling the cross-cuts.
- This allows you to make one rip for an index edge and a matching 90 degree cross-cut made easily and quickly.
- Use the Pro-Series Adapter Cantilever Style Clamps included in this hand held saw set to hold everything in place on fuzzy or warped lumber.
- Use the buttons below to select either "Right-Blade" or "Left-Blade" for the Simple Square in this track saw guide rail bundle.
- Standing behind your saw, RB has the blade to the right, LB has it to the left.
-
90-Day Money Back Guarantee
-
Lifetime Warranty
-
Unlimited Phone & Email Support
-
Clean, Consistent Cuts Every Time
-
Precision Tools, American Made
Featuring 177 inches of the TrueTrac guide rail, the 90 degree Simple Square, and a pair of the Cantilever Style Clamps, this kit is aimed at allowing long rips and accurate cross-cuts on virtually any material.
Cutting Capacities:
- Length = 168 inches total, with 9 inches of overhang (177 inches of track total)
Depth depends on the blade diameter in use.
The adapter plate and track will remove 3/4 of an inch from your overall depth of cut (DOC).
With an average 6-1/2 inch bladed saw your DOC is 1-1/8 inches
- 7-1/4 blade = 1-1/2 inch material
- 8-1/4 blade = 2 inch material
- 10-1/4 blade = 3 inch material
The Universal Saw Adapter Plate comes in two sizes. The standard size is appropriate for any circular saw with a 6-1/2 inch to an 8-1/4 inch diameter blade. The larger saw adapter plate is designed for the 10-1/4 inch diameter saws.
Bundle Includes:
- One (1) 57 inch track
- One (2) 48 inch tracks
- One (1) 24 inch track
- Eight (8) Appropriate Length Anti-chip Strips, installed on tracks
- One (1) Universal Saw Adapter Plate
- Six (6) Self-aligning Dovetail Connectors (set screws installed)
- One (1) Set-up Block
- One (1) Hardware Packet (6 bolts, 6 nuts, 1 L-shaped hex wrench)
- One (1) Zero Clearance Block (with mounting brass inserts & bolts)
- One (1) 90 Degree Simple Square (w/ 12 inch connectors & hardware)
- Two (2) Pro-Series Adapter Cantilever Clamps
- Full color hard copy of installation instructions.
This system is compatible with virtually any style of circular saw.
The top surface of the Universal Saw Adapter Plate (SAP) is flat and you will be required to custom drill mounting hole locations in both the SAP and the OEM metal base plate of your circular saw. There are no saws manufactured that include predrilled holes that are useful in this scenario.
We provide a machined Set Up Block (SUB) which is used to gauge the distance from the outside edge of the SAP to the body of your saw blade. This ensures paralleism between your saw blade and arbor and the machined grooves on the underside of the SAP, as well as setting the proper spacing so that the blade trims the white Anti-Chip Strips along the edge of the track.
View the entire process by visiting the Videos section of our website, in particular the Set Up & How-To category.
