TrueTrac - The Better Track Saw System

RGS - 48” x 48” Threaded Cross Feed Slab Mill

Sale price Price $ 849.99 Regular price $ 749.99 Unit price  per 

CURRENT LEAD TIME ON ALL RGS UNITS: 1-2 Weeks

***

Working Area Specification: 48" W x 48" L x 2-1/2" Thick (w/o shimming rails)

Total Travel, Spindle Center Line: 49-1/2" W, 50" L

Router Not Included

The TrueTrac Router Gantry System (RGS) is an easy and accurate way to simultaneously surface and flatten live edge slabs, epoxy tables or counter tops, bar surfaces, table glue-ups, and much more!

With an industry-unique Threaded Cross Feed this system allows you complete and utter control over your handheld router, allowing you to bring the router to the work rather than the work to the router. Simply use the provided thumb screws to securely fasten the RGS Adapter Plate to the custom nuts on the threaded rod installed in the gantry rail. By turning the provided hand-crank, you may now accurately, safely, and easily index your router across the 'transverse' or 'bridge' of the gantry system.

This allows for consistent edge jointing capabilities with straight or fluted router bits, being able to produce equally spaced fluted columns or door frames using a ball-nose bit, rabbit cuts on large projects, and accurate dado grooves using standard sized bits.

Our 100% custom American-made and purpose designed heavy-duty extrusions are expandable to virtually any width or length desired and will easily support your 2-1/2 to 3-1/2 HP router without bending, bowing, warping, or twisting during normal use.

All sliding components are 100% CNC machined from Acetal Copolymer, also referred to as Delrin, which is an engineered plastic specifically designed for sliding friction applications and holds machining tolerances wonderfully.

Simply stated, our system is professionally designed and purposefully built to give you years of trouble-free use and is fully backed by our lifetime money-back guarantee.

The RGS is available in a variety of lengths and widths to suit your project needs and is always able to be expanded later.

RGS Adapter Plate comes pre-drilled for a variety of routers. Please see the list in the product photos. Blank plates with a 1/4" diameter hole pre-drilled in the center are available upon request via phone or email.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Daniel K
well built

Works great at refining rough cut lumber into flat and usable boards.

★Product Reviews

Our Customers Speak For Us:

276 reviews
92%
(254)
5%
(14)
1%
(4)
1%
(3)
0%
(1)
Perfect cuts every time

It took me about an hour to set it up. I drilled the plate mounting holes from the bottom ,plate, side, seemed easier to me. I countersunk the mounting screws in the plate. I checked the plate to blade with the included jig and a small flashlight after every drill and screw. I broke down a full sheet of plywood and checked every cut with a Starrett tape measure and a framing square and everyone was perfect. I don't do much sheet goods, mostly hardwood, but this thing is excellent at sheet goods. I just lay the sheet on an old piece of 3/8 inch, support the overhang, make one small mark on each side of the sheet, set the track on the sheet on the marks, set the saw on the track and saw. I keep my left hand on the left side of the track just to know if the track shifts, it never does. I set the blade 1/16 lower than the thickness of the sheet. i think what amazes me is you just lay the sheet down and cut it, no fence no miter gauge, just a tape measure and pencil. 8 pieces all told.

Wish I Bought This SOONER

Such a great system. Really works great w my Triton and leaves the slab so much smoother than my previous set up. Greatly reduced my sanding times after flattening so I can get to the fun stuff! Great product and Jacob did a great job communicating during a supply chain issue. Higy recommend him and the product.

Nice and easy

This is a well made storage device and I can easily keep all the gear in the bag for easy transport.

Wonderful customer service

Thank you for the caring and good service, I have never been so impressed, with the good products and very good quality. Thank you again.

Cantilever clamps

Jacob, these clamps make using the track saw attachment a breeze. Use them on everything I build that has a straight side too it.