Take your woodworking projects to the next level with the TrueTrac Router Gantry System in the 48-inch x 72-inch capacity version.

Working Area

• Material Width: 48 in.
• Material Length: 72 in.
• Material Thickness: 2-1/4 in.

With a longer working area than the 48-inch by 48-inch version, this system is designed to deliver professional-level results every time across a huge variety of your woodworking projects.

Modular in Length and Width

• 27-1/2-inch or 55-inch extension kits readily available
• Kits include rails and dovetail connectors

The modular design of the TrueTrac Router Gantry System comes through loud and clear with this unit!

Easily rearrange this 48-inch by 72-inch kit to handle everything from a 22x48, 22x96, 48x48, or 48x72 capacity, easily letting you tailor the system to your specific project needs, whether you're working on a small coffee table or cutting board on up to a larger four person dining table.

Optional Upgrades

• Threaded Cross Feed

  With the Threaded Cross Feed upgrade you can precisely control the placement of your router across the width of the RGS unit, opening a new realm of projects that are possible.

  For planing, consistently step over for your next pass leading to improved surface finishes that require up to 80% less finish sanding.

  For everything else, the Threaded option effectively turns the RGS into a router table flipped upside down. Effortlessly cut box border inlay grooves, create equally spaced flutes on beams or mantles, edge joint, or perform shaping operations with confidence.

• Dust Collection Shroud - (View DCS Here)

  This dual-sided shroud collects 90% of the dust and shavings from your RGS unit when paired with a 800-1000 CFM dust extractor utilizing an industry standard 4-inch diameter hose. Kit includes everything from the strip brushes upwards to a 2-1/2 to 4-inch wye fitting.

Lifetime Warranty

Whether you're a professional woodworker, DIY enthusiast, or educational institution, the TrueTrac Router Gantry System is the perfect tool for achieving precision and consistency in your finished projects.

Plus, with our commitment to exceptional customer service, we're just a phone call or email away to take care of any issues or questions that may come up.

Upgrade to the TrueTrac Router Gantry System in the 48-inch x 72-inch capacity version and take your woodworking to the next level!

Let's get technical!

• Working Area
  • Material Width: 48 in.
  • Material Length: 72 in.
  • Material Thickness: 2-1/4 in.
    • This assumes the bottom long axis rails are on the same planar surface as the material being processed.
    • To handle thicker materials, simply shim under the long axis rails and lift the RGS unit relative to the main support surface.
• Outer Physical Dimensions
  • Unit Width: 57 in.
  • Unit Length: 84-1/2 in.
• Total Travel (Spindle Center)
  • Width Travel: 49-1/2 in.
  • Length Travel: 77 in.
• Unit Weight
  • 40 lbs
• Materials Used
  • 6063 custom extruded aluminum, satin finish hard anodize finish
  • Solid Acetal Resin, CNC machined sliding components and end caps
  • 6061-T6 1/4-inch thick aluminum base plate, predrilled for 20 routers

The following items make the 48-inch x 72-inch Manual Feed Slab Mill:

• Two (2) 27-1/2 inch length RGS guide rails
• Four (4) 55 inch length RGS guide rails
• Four (4) 6-inch length self-aligning dovetail connectors, with set screws installed
• Eight (8) Bearing End Caps, installed on rails with 10-24 Type F Machine Screws
• Two (2) Short Linear Slides (Short Runners) with bubble levels installed
• Two (2) Long Linear Slides (Long Runners)
• Two (2) Drop Downs
• One (1) Router Base Plate, pre-drilled for listed routers (see compatibility below)
• Fourteen (14) 10-24 threaded, 1/4 inch diameter, 1/4 inch length Shoulder Bolts
• Six (6) 8-32 x 1/2 L flat head Phillips drive machine screws
• One (1) 1/8 inch L-shaped hex wrench
• Two (2) Hand Grip Knobs

If the Threaded Cross Feed version is selected, one of the 27-1/2 inch extrusions above will have the 27-1/2 inch Threaded Rod Kit installed. Additionally, two (2) knurled brass thumb screws will be included with the standard hardware packet as well as one (1) hand crank to attach to the threaded rod.

The Threaded Cross Feed units can be moved manually without the rod or hand crank by simply removing the two thumb screws and moving the Router Base Assembly by hand.

This product ships via UPS and is not deliverable to a PO Box due to size and weight.

Currently we are shipping within 2-3 business days or faster for all RGS units.

We are located in Ohio. Anything East of the Rocky Mountains is generally 3 days or less transit time, with the upper New England area and the west coast averaging 4-5 days.

We can ship internationally via UPS or DHL and frequently ship to Canada.

Mounting Hole Patterns Pre-Drilled For The Following Routers:

• Bosch 1617, 1618, 1619, 1619-EVS (fixed base only)
• DeWalt 616, 618, 625
• Festool OF1400, OF2200
• Hitachi M12VC
• Makita 1100 (Makita RP1800 & RP2301 require blank base plate)
• Milwaukee 5616, 5624, 5625-20
• Bora PM-6250 Fixed Base
• Porter Cable 690, 890, 7529, 97529, 8529
• Porter Cable 7518, 7519, 7538, 7539
• Ridgid 2930
• Triton TRA001, MOF001, TFBR001

Blank plate with one 1/4-inch hole drilled on center available upon request. Router plates are fully CNC machined 1/4-inch thick 6061 aluminum.