TrueTrac

RGS - Router Adapter Plate Assembly

Sale price Price $ 184.99 Regular price Unit price  per 

Easily add a second router to your existing Router Gantry System with this complete router plate assembly unit.

Includes pre-drilled base plate, two drop downs, two short runners, two vertical grip handles, installed leveling vials, and all required hardware to assemble the unit. Mounting hardware to attach your router not provided.

Router mounting plate is face-milled on both surfaces to ensure flatness and is made from 1/4 inch 6061 aluminum plate. Runners are fully CNC Machined from solid copolymer Delrin with press-fit brass inserts for assembly. Aluminum components have a glass bead blast finish.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
★Product Reviews

Our Customers Speak For Us:

276 reviews
92%
(254)
5%
(14)
1%
(4)
1%
(3)
0%
(1)
Perfect cuts every time

It took me about an hour to set it up. I drilled the plate mounting holes from the bottom ,plate, side, seemed easier to me. I countersunk the mounting screws in the plate. I checked the plate to blade with the included jig and a small flashlight after every drill and screw. I broke down a full sheet of plywood and checked every cut with a Starrett tape measure and a framing square and everyone was perfect. I don't do much sheet goods, mostly hardwood, but this thing is excellent at sheet goods. I just lay the sheet on an old piece of 3/8 inch, support the overhang, make one small mark on each side of the sheet, set the track on the sheet on the marks, set the saw on the track and saw. I keep my left hand on the left side of the track just to know if the track shifts, it never does. I set the blade 1/16 lower than the thickness of the sheet. i think what amazes me is you just lay the sheet down and cut it, no fence no miter gauge, just a tape measure and pencil. 8 pieces all told.

Wish I Bought This SOONER

Such a great system. Really works great w my Triton and leaves the slab so much smoother than my previous set up. Greatly reduced my sanding times after flattening so I can get to the fun stuff! Great product and Jacob did a great job communicating during a supply chain issue. Higy recommend him and the product.

Nice and easy

This is a well made storage device and I can easily keep all the gear in the bag for easy transport.

Wonderful customer service

Thank you for the caring and good service, I have never been so impressed, with the good products and very good quality. Thank you again.

Cantilever clamps

Jacob, these clamps make using the track saw attachment a breeze. Use them on everything I build that has a straight side too it.