Open image in slideshow, Square Pkg #2
TrueTrac - The Better Track Saw System

Square Pkg #2

$ 189.99 $ 213.57

This track saw kit includes a TrueTrac Simple Square kit and a 57 inch section of the TrueTrac Pro-Series track.

Please select which variant of the Simple Square track saw guide you require with the drop-down menu above - Looking from the rear of your saw, "Right-Blade" has the saw blade to the right side of the saw body, and "Left-Blade" has the blade to the left.

Open image in slideshow, Square Pkg #2
Open image in slideshow, Square Pkg #2

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
★Product Reviews

Our Customers Speak For Us:

276 reviews
92%
(254)
5%
(14)
1%
(4)
1%
(3)
0%
(1)
C
TrueTrac Pro-Series 8' Combo Kit
Customer
Perfect cuts every time

It took me about an hour to set it up. I drilled the plate mounting holes from the bottom ,plate, side, seemed easier to me. I countersunk the mounting screws in the plate. I checked the plate to blade with the included jig and a small flashlight after every drill and screw. I broke down a full sheet of plywood and checked every cut with a Starrett tape measure and a framing square and everyone was perfect. I don't do much sheet goods, mostly hardwood, but this thing is excellent at sheet goods. I just lay the sheet on an old piece of 3/8 inch, support the overhang, make one small mark on each side of the sheet, set the track on the sheet on the marks, set the saw on the track and saw. I keep my left hand on the left side of the track just to know if the track shifts, it never does. I set the blade 1/16 lower than the thickness of the sheet. i think what amazes me is you just lay the sheet down and cut it, no fence no miter gauge, just a tape measure and pencil. 8 pieces all told.

User picture User picture User picture
D
RGS - 48” x 96” Threaded Cross Feed Slab Mill
David Boynton
Wish I Bought This SOONER

Such a great system. Really works great w my Triton and leaves the slab so much smoother than my previous set up. Greatly reduced my sanding times after flattening so I can get to the fun stuff! Great product and Jacob did a great job communicating during a supply chain issue. Higy recommend him and the product.

E
TrueTrac Carrying & Storage Case
Ed
Nice and easy

This is a well made storage device and I can easily keep all the gear in the bag for easy transport.

E
Cantilever Hold Down Clamps
Ed
Wonderful customer service

Thank you for the caring and good service, I have never been so impressed, with the good products and very good quality. Thank you again.

N
TrueTrac Cantilever Style Clamps
Nigel Irons
Cantilever clamps

Jacob, these clamps make using the track saw attachment a breeze. Use them on everything I build that has a straight side too it.

123