TrueTrac

TrueTrac Saw Adapter Plate

Sale price Price $ 49.99 Regular price $ 59.99 Unit price  per 

Uniquely designed to accept any type of circular table saw: 6.5", 7.25" or 8.25", Right or Left cut, worm drive, direct drive, corded or cordless. The circular saw adapter plate also creates a zero clearance cutting path by utilizing an anti-chip zero clearance attachment that compliments the anti-chip strips found on the saw guide rails for splinter free cuts.
 
This TrueTrac Saw adapter kit includes a track saw adapter plate, anti-chip zero clearance saw block, alignment jig, and all needed hardware. Colors may vary.

 

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
r
roy gramer
10 1/4 track saw adapter

Great product . fits well and makes a great cut on the wood slabs I cut . very happy with price and quality

M
Marvin Bryant

Its a great addition to my shop and I like the fact that it is made in the USA

H
Howard Arch
First time user.

Purchased two plates, one for 7 1/4" saw other for 10 1/4" saw . Ripped 3" hardwood boards with 10 1/4" saw. Used clamps, worked like a charm. Also Ripped some glue joint edges, too big for jointer, worked well. Set up 7 1/4" for thinner material, use opposite side of trac with this saw, worked great. Thanks Howie.

★Product Reviews

Our Customers Speak For Us:

276 reviews
92%
(254)
5%
(14)
1%
(4)
1%
(3)
0%
(1)
Perfect cuts every time

It took me about an hour to set it up. I drilled the plate mounting holes from the bottom ,plate, side, seemed easier to me. I countersunk the mounting screws in the plate. I checked the plate to blade with the included jig and a small flashlight after every drill and screw. I broke down a full sheet of plywood and checked every cut with a Starrett tape measure and a framing square and everyone was perfect. I don't do much sheet goods, mostly hardwood, but this thing is excellent at sheet goods. I just lay the sheet on an old piece of 3/8 inch, support the overhang, make one small mark on each side of the sheet, set the track on the sheet on the marks, set the saw on the track and saw. I keep my left hand on the left side of the track just to know if the track shifts, it never does. I set the blade 1/16 lower than the thickness of the sheet. i think what amazes me is you just lay the sheet down and cut it, no fence no miter gauge, just a tape measure and pencil. 8 pieces all told.

Wish I Bought This SOONER

Such a great system. Really works great w my Triton and leaves the slab so much smoother than my previous set up. Greatly reduced my sanding times after flattening so I can get to the fun stuff! Great product and Jacob did a great job communicating during a supply chain issue. Higy recommend him and the product.

Nice and easy

This is a well made storage device and I can easily keep all the gear in the bag for easy transport.

Wonderful customer service

Thank you for the caring and good service, I have never been so impressed, with the good products and very good quality. Thank you again.

Cantilever clamps

Jacob, these clamps make using the track saw attachment a breeze. Use them on everything I build that has a straight side too it.