TrueTrac

TrueTrac Pro-Series 4' Starter Kit

Sale price Price $ 189.99 Regular price $ 199.99 Unit price  per 

In stock and ready to ship!
The perfect introductory guide rail kit for the homeowner or weekend DIY'er that allows you to crosscut 4x8 sheet goods, single or multiple boards at once, cut beveled edges, or trim narrow boards for face frames or filler strips.
4' Track Saw Starter Kit Includes:
  • One (1) 57 inch track
  • Two (2) 57 inch length anti-chip strips, installed on track
  • One (1) Universal Saw Adapter Plate
  • One (1) setup jig
  • One (1) hardware packet (6 bolts, 6 nuts, 1 L-shaped hex wrench)
  • One (1) Zero Clearance Block
  • Hard copy of installation instructions

Be sure to also check out TrueTrac Saw's E-Series 4' Circular Saw Guide Rail System.

Customer Reviews

Based on 17 reviews
94%
(16)
6%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Robert Sherman

TrueTrac Pro-Series 4' Starter Kit

S
Steve G.
Plenty of good

Purchased track system as I did not want to buy another power tool (trac saw). Quality of product is very good. Assembly was easy to adapt to my saw and it produces easy straight cuts. Inserts do tend to slide out of track a little easier than I would like but it is just part of the learning process. I used the trac primarily reworking my deck and cutting boards in place. No the that this will change your depth of cut for the saw. Still able to cut 1.5”. Good straight lines, Excellent instructions, easy ordering and Jacob is quick to answer any questions. Thank you.

M
Meg
Confidence in Cutting

I've always disliked using circular saws. The True Trac, however, has changed that, giving me the ability to make controlled and accurate cuts while reducing set-up time. I've been using the starter kit for the last couple of months to break down plywood and hardwoods. It also helped me to make precision bevel cuts on a furniture project and create straight edges for some jigs. Jacob provided great customer service when I was making a buying decision. For my purposes as a DYI-er and hobbyist woodworker, the True Trac was a good choice over buying a track saw.

B
Bruce Rising
Can't blame my tools anymore....

I finally got around to making my first few cuts with the Truetrac. Making some precision cuts on MDF to fit a custom table stand. After setting up the Truetrac my first cuts were perfect. As were the cuts after that. Stacked up, all the pieces were nicely square and even. This is a really effective piece of equipment. Good job guys.

J
Jonathan Picker
professional grade in every way

I am highly impressed. Everything about TrueTrac has been a pleasure. The summary of my experience so far is that the company is friendly, responsive and professional and the product is a serious piece of quality engineering.

They make sure you get what you want and follow up to ensure everything is to satisfaction.
I was especially struck by their integrity. One trivial piece was missing from my order and I emailed them. The response from Jacob was fast and to immediately sort things. I later had a technical question, which was answered quickly and in a manner that was helpful. Furthermore, the product descriptions are accurate and honest. They say for instance that the dust collector will help but not remove all the dust. My experience is that their estimate of its efficiency is pretty accurate.
One piece of advise - listen carefully to the video instructions. The safety procedures work and provide for a precise result. I did not follow it for one chipguard and had their predicted outcome. Also, if you have a 6.5 inch circular saw, watch the installation video to the end before setting up as there is helpful advise I wish I had listened to - my fault for rushing in, albeit I still ended up with a well set saw that cuts a perfect line.

★Product Reviews

Our Customers Speak For Us:

202 reviews
92%
(186)
6%
(12)
0%
(1)
1%
(2)
0%
(1)
Fantastic system for transforming your circular saw!

After installing the saw base on my DeWalt circular saw (along with a new blade), I have primarily used my TrueTrac for small projects so far. In fact, it is getting much more use than I expected! The main reason I purchased it was to rip long boards cleanly to build skin on frame canoes. I was hoping it would give better results and be less dangerous than using the table saw. This has exceeded my expectations--each cut is perfect! I purchased the 12ft kit as well as an additional 2ft section of track, and this is now my go to saw when I need precision.

Thank you! Well worth every penny.

Love my TrueTrac!

Nothing to say. Exactly as advertised. Great customer service and follow up.

TrueTrac Cantilever Style Clamps

Truetrac, still my favorite after all these years!

I teach design and construction at a large state university. In and out of the classroom, I'm a designer and a maker.

A few years ago I picked up a truetrac system and I couldn't be happier with it. I'd tried several competitors and had issues with each of them but was really pleased with truetracks products when it arrived: it's solid, perfectly engineered and feels seriously legit. I have use this system so much over the past few years and just wanted to come back with an update to let everyone know I still think it's an excellent, excellent product. I had mine originally set up on a D-walt until the saw gave out on me, now I have it on a dedicated Metabo and it's still perfect. Aside from doing everything I'd hoped it would (I work with students in the field building structures for local not-for-profit organizations. We have modest means and portability is everything for us. What we can't throw into the back of a car and set up on sawhorses just isn't going to work for us). The thing I wasn't counting on are the new directions (seriously) that we can explore with our designs. Our structures since true track has joined our team are so much more interesting from a functional and aesthetic purposes. We taper roof joists to carry the necessary loads but tapering off to a beautiful form: we never worked like this before because a miter saw and a table saw just cannot do what truetrack can.

Truetrack - we love you! Years of use (and student site abuse) and you are still an awesome part of our little bag of tricks and trade secrets. Thank you for helping us expand our horizons.

Time saver

We attached a Milwaukee 10 1/4 circular saw to it. We were working with aluminum panels and the Trac it self wouldn't side or move , just awesome! Our materials were 6" thick and had to make to passes to cut it. The True Trac system made it super easy!!!