These are product installation and how-to videos we put together to help answer a handful of questions that were popping up consistently.
Mounting the Saw Adapter Plate
Jacob Rhodes showing the steps to mount your saw to the TrueTrac Adapter Plate
Trimming The ZCB and Anti-Chip Strips
Jacob Rhodes walking you through how to properly trim the ZCB and Anti-Chip Strips after mounting your saw.
Mounting your router to the Router Adapter Plate
Video instructions for mounting the Router Adapter Plate to your router! This is for the original Router Plate, not the Dado Jig.
Using the TrueTrac Dado Jig
Jacob Rhodes showing the steps to mount your router to the TrueTrac Dado Jig and how the jig functions.
Short video covering some of the frequently asked questions about the anti-chip strips and a few other items.
TrueTrac Simple Square Demonstration
Jacob Rhodes walks you through what comes with the kit, how to install, and how to use the Simple Square.
TrueTrac Dust Collection Demonstration
Jacob Rhodes showing the Dust Collection Nozzle in action.
Installing & Trimming The Dust Collection Nozzle
Steps to install and trim both the DCN and the Anti-Chip strips on your track.
Retrofitting A Saw Adapter Plate for Dust Collection
Jacob Rhodes showing the steps required to modify your existing Saw Adapter Plate for the new Dust Collection Nozzle.