TrueTrac - The Better Track Saw System

Dado Pkg #3

Sale price Price $ 114.99 Regular price $ 159.99 Unit price  per 

If you've already got the TrueTrac Saw System, this is an easy bundle to add the capability of doing custom sized dado grooves with your handheld router!

We also sell an individual dado/router jig.


  • 2 - TrueTrac Toggle Clamps
  • 1 - TrueTrac Dado Jig
  • 1 - Hardware packet (bushing, 1/4 & 3/8 measurement block)

Customer Reviews

Based on 2 reviews
Bryan Worthy
Easy, Accurate Dados

I already had the TrueTrac Saw system so adding the Router adapter was an easy decision. It was easy to setup (after watching the video and reading the instructions). After a couple of test cuts to dial in the depth and make sure I was setting the width properly I was ready to cut some dados in my workbench top to install T-Track. It worked exactly like it was supposed to and I couldn't be happier with it.

Customer service is also great.

Earl Vaughan
Recent Purchase

I received your product and was very pleased, I have not has a chance to use yet, but I am sure every thing will work as well as all the other products I have purchased from you.

★Product Reviews

Our Customers Speak For Us:

276 reviews
Perfect cuts every time

It took me about an hour to set it up. I drilled the plate mounting holes from the bottom ,plate, side, seemed easier to me. I countersunk the mounting screws in the plate. I checked the plate to blade with the included jig and a small flashlight after every drill and screw. I broke down a full sheet of plywood and checked every cut with a Starrett tape measure and a framing square and everyone was perfect. I don't do much sheet goods, mostly hardwood, but this thing is excellent at sheet goods. I just lay the sheet on an old piece of 3/8 inch, support the overhang, make one small mark on each side of the sheet, set the track on the sheet on the marks, set the saw on the track and saw. I keep my left hand on the left side of the track just to know if the track shifts, it never does. I set the blade 1/16 lower than the thickness of the sheet. i think what amazes me is you just lay the sheet down and cut it, no fence no miter gauge, just a tape measure and pencil. 8 pieces all told.

Wish I Bought This SOONER

Such a great system. Really works great w my Triton and leaves the slab so much smoother than my previous set up. Greatly reduced my sanding times after flattening so I can get to the fun stuff! Great product and Jacob did a great job communicating during a supply chain issue. Higy recommend him and the product.

Nice and easy

This is a well made storage device and I can easily keep all the gear in the bag for easy transport.

Wonderful customer service

Thank you for the caring and good service, I have never been so impressed, with the good products and very good quality. Thank you again.

Cantilever clamps

Jacob, these clamps make using the track saw attachment a breeze. Use them on everything I build that has a straight side too it.